News Center
As a kind of gravure coating, the micro-cavity coating machine belongs to roller coating. The difference between it and gravure coating mainly lies in the gravure roller diameter, back roller and the movement direction of gravure roller and substrate. With the increasing market demand for high functional films and the popularization of wet coating technology, the micro-cavity coating machine will be widely used in the high-end functional film deep processing industry.
日期：2023-02-11In fact, the working principle of the slitter and the slitter is different. In the case of the slitter, the wide material is divided into the desired width through a fixed or rotary knife, while in the case of the slitter, the material is cut into the desired width according to the movement of the cutting knife.
日期：2022-11-22The coating machine extrusion coating is to apply the molten mesh of synthetic resin onto the base material. It is a multi-functional coating technology, which is used for the economic application of various plastics, especially polyethylene, cardboard, corrugated fibreboard, paper, aluminum foil, cellulose, non-woven fabric or plastic film. What are the characteristics of the coating extrusion technology? Today we tell you:
日期：2022-11-221. The overall installation accuracy is low, Solution: If the installation center of each component deviates from the design center line of the whole machine or has an included angle with the design center, the foil strip will be seriously wrinkled, and the installation center must be adjusted.
日期：2022-11-11The coating machine extrusion coating is to apply the molten mesh of synthetic resin onto the base material. It is a multi-functional coating technology, which is used for the economic application of various plastics, especially polyethylene, cardboard, corrugated fibreboard, paper, aluminum foil, cellulose, non-woven fabric or plastic film. What is the function of coating extrusion technology? Today we tell you:
日期：2022-11-11The protective film coater is composed of four systems: master coil conveying system, coating system, heating and drying system, and cooling system. What are their functions? Let's break it down today:
日期：2022-10-26We use normal cutting equipment to correct deviations after problems occur, but for a special type of round knife cutting table, how should its round knife correct deviations? Many people are not very clear about this step. Next, we will teach you how to correct the deviation of the round knife cutting table.
日期：2022-10-26Qishi Town Customs Working Committee Activity Day
日期：2022-10-10In recent years, China's paper industry and printing and packaging industry have achieved rapid development, facing unprecedented opportunities, but compared with the world's advanced equipment, it also faces enormous challenges. The production capacity of the production equipment is very strong, but our products are basically in the low-end market. The main reason is the limitation of technical conditions. Up to now, a large number of slitters still use magnetic powder brakes to control the winding tension, which limits the running speed of the equipment and wastes energy. Moreover, due to the service life of the magnetic powder itself, the failure rate is high.
日期：2022-10-10Because of the characteristics of the tape slitter, it is widely used in paper making machinery and printing and packaging machinery industry. The operation is very simple. However, several points should be noted during installation. Follow the installation instructions strictly to avoid future use and installation problems. Unnecessary troubles affected production.
日期：2022-10-10Some people say that money is a wealth. Some people say that confidence is a wealth, and some people say that love is a wealth. I think setbacks are a wealth.
日期：2022-09-19The segment machine is a device for cutting. The most important part is the blade. So how does the tension of the barrier be debugged? What are the reasons when there is a problem with the blade? What are the problems? how should I solve this?
日期：2022-09-19
Mobile terminal
Address：No. 151, Daxing Road, Dongping, Dongguan City
URL：www.aichehuoban.cn
landline：+86-769-86723139
Fax：+86-769-86736139
After-sales service line：0769-86738139致電總機(jī)轉(zhuǎn)808
E-mail：[email protected]
Domestic business：0086-769-86780883
international trade：0086-769-86780883轉(zhuǎn)886/887/882
Consulting